sziasztok be raktam eszt a fajta optolot minden gond nélkül le fordul a game db indító de játékba már nem jó le hívom az optolot fogom rá húzom pld egy vértre vagy fegyvere akkor pirosan jelölő de nem csinál semmit 0 syserr.txt van kliens és szerver oldalon szerintetek hol lehet a probléma?
erről lenne szó amúgy https://forum.turkmmo.com/konu/3456714-enchant-item-efsun-nesnesi/
ha valaki nem tudná hogy mi a hiba akkor itt egy kép
(https://board.ddmt2.net/proxy.php?request=http%3A%2F%2Fwww.kepfeltoltes.eu%2Fimages%2Fhdd1%2F2017%2F06%2F03%2F1660603_220105.jpg&hash=76cddf3d35cb044f355a99e03dd2f260ae7feb3a) (http://www.kepfeltoltes.eu/view.php?filename=1660603_220105.jpg)
« Dátum: 2017-06-03, 11:49:36 »
Üzenet összefésülés: 2017-06-11, 13:39:43
tessék nem létező optoló rendszer syserr.txt je
chanel 1
SYSERR: Jun 8 20:03:06.222731 :: pid_init:
Start of pid: 39658
SYSERR: Jun 8 20:03:17.752917 :: Show: cannot find sectree by 984013x273270 mapindex 41
SYSERR: Jun 8 20:03:18.636675 :: LoadSkillMotion: Motion: Skill exist but no motion data for index 0 mob 3596 skill 257
SYSERR: Jun 8 20:03:18.636771 :: LoadSkillMotion: Motion: Skill exist but no motion data for index 1 mob 3596 skill 258
chanel1 core1SYSERR: Jun 8 20:03:08.226020 :: pid_init:
Start of pid: 39661
SYSERR: Jun 8 20:03:19.19587 :: Show: cannot find sectree by 984013x273270 mapindex 41
SYSERR: Jun 8 20:03:19.568807 :: LoadSkillMotion: Motion: Skill exist but no motion data for index 0 mob 3596 skill 257
SYSERR: Jun 8 20:03:19.568949 :: LoadSkillMotion: Motion: Skill exist but no motion data for index 1 mob 3596 skill 258
db
SYSERR: Jun 8 20:03:04.208654 :: pid_init:
Start of pid: 39655
SYSERR: Jun 8 20:03:04.210400 :: socket_connect: HOST localhost:60500, could not connect.
SYSERR: Jun 9 22:01:16.54556 :: Analyze: Handshake phase does not handle packet 3 (fd 15)
SYSERR: Jun 9 22:01:16.54615 :: Process: SEQUENCE 290c0a80 mismatch 0xaf != 0x25 header 3
SYSERR: Jun 9 22:01:16.54649 :: Process: SEQUENCE_LOG [UNKNOWN]-------------
[003 : 0xaf]
SYSERR: Jun 9 22:01:19.896687 :: Analyze: Handshake phase does not handle packet 3 (fd 15)
SYSERR: Jun 9 22:01:19.896760 :: Process: SEQUENCE 290c0a80 mismatch 0xaf != 0x25 header 3
SYSERR: Jun 9 22:01:19.896791 :: Process: SEQUENCE_LOG [UNKNOWN]-------------
[003 : 0xaf]
SYSERR: Jun 10 09:08:07.736062 :: Process: UNKNOWN HEADER: 22, LAST HEADER: 0(0), REMAIN BYTES: 517, fd: 15
SYSERR: Jun 10 09:08:07.854083 :: Analyze: Handshake phase does not handle packet 71 (fd 15)
SYSERR: Jun 10 09:08:07.854132 :: Process: SEQUENCE 290c0a80 mismatch 0xaf != 0x20 header 71
SYSERR: Jun 10 09:08:07.854152 :: Process: SEQUENCE_LOG [UNKNOWN]-------------
[071 : 0xaf]
auth SYSERR: Jun 8 20:03:02.175105 :: pid_init:
Start of pid: 39652
SYSERR: Jun 8 20:03:02.175216 :: Start: TABLE_POSTFIX not configured use default
SYSERR: Jun 8 20:03:06.494518 :: __GetHostInfo: __GetHostInfo() ==> DirectQuery failed(SELECT mIP FROM gmhost)
SYSERR: Jun 8 20:03:08.503484 :: __GetHostInfo: __GetHostInfo() ==> DirectQuery failed(SELECT mIP FROM gmhost)
SYSERR: Jun 8 20:03:10.485110 :: __GetHostInfo: __GetHostInfo() ==> DirectQuery failed(SELECT mIP FROM gmhost)
0611 17:06:31332 :: CEffectManager::RegisterEffect - LoadScript(d:/ymir work/effect/background/warpgate01_kek.mse) Error
0611 17:06:31332 :: CArea::SetEffect effect register error d:/ymir work/effect/background/warpgate01_kek.mse
0611 17:06:31541 :: CEffectManager::RegisterEffect - LoadScript(d:/ymir work/effect/background/warpgate01_sarga.mse) Error
0611 17:06:31541 :: CArea::SetEffect effect register error d:/ymir work/effect/background/warpgate01_sarga.mse
na nincs itt semmi amit érdemes másolni nektek
Ha azt írja after their function akkor az egész funkció után kell beilleszteni nem azonnal.
Köszönöm szépen. végre valami, értelmes, ember is tud írni, témát nem zárom le egyenlőre + megy.